Bondtech LGX® Shortcut Copperhead skrivehode

2,069 kr

Manufacturer:

Utsolgt

  Send meg epost når varen er på lager!
  Du vil få en epost når varen er tilgjengelig!

cancel?
Produktnummer: PN26545 Kategori:

Beskrivelse

Hovedfordeler

Gir tilgang til alt tilgjengelig materiale.
Gjør det mulig å skrive ut fleksible og myke materialer raskere.
Den er liten og lett.
Tillater montering på mange forskjellige måter.

Designet for å være fleksibel

LGX™ For Flexibles-settet inkluderer en vendbar kjøleribbe som kan installeres på venstre eller høyre side av kuldeblokken. Kjøleribben inkluderer også hullmønster for å feste 40×40 vifter.

 

Technical Specification

LGX™ EXTRUDER

  • e-steps value : 400 on 16 bit micro-stepping setups; 800 on 32 bit micro-stepping setups.
  • Drive wheels : hardened steel;
  • Materials compatibility : abrasive; rigid; semi-flexible; flexible; and soft.
  • Mounting holes : M3
  • Mounting patterns : bottom anterior (2 points); left (2 points), right (2 points), front (4 points), back (4 points)
  • Holes on the sides of the LGX™ : 5 mm depth
  • Holes on the bottom of the LGX™ : 12 mm depth
  • retraction speed : 35 mm/s
  • retraction distance (bowden) : ~5 mm (0.4 + tube length x 0.15)
  • retraction distance (direct drive) for rigid materials : 0.4 mm
  • retraction distance (direct drive) for soft materials : 3 mm
  • Max environment operating temperature : 70°C
  • LGX™ DD net weight : 218.6 g
  • LGX™ B net weight : 224 g
  • Package measurements : 80x103x73 mm
  • Package weight : 269 g
  • Download the LGX Technical Drawings here.

 

LDO Stepper Motor for Bondtech LGX™

  • PH-06AWJ connector
  • 2 phases
  • DC 5.5 V
  • Max 1.0A/phase
    • To use the LGX and run the stepper motor with currents between ~0.7 and ~0.9A:
    • set Vref between 0.70 and 0.90 using TMC stepper drivers;
    • set Vref between 0.28 and 0.36 for stock Pololu A4998 stepper drivers;
    • set Vref between 0.56 and 0.72 for Pololu A4998 stepper drivers on Creality.
  • Class B motor, rated up to 130°C
    • Max recommended environment : 70°C
    • Max temperature at this environment temperature can go up to 130°C on account of the self heating.
  • Download the stepper motor Technical Data Sheet here.

 

LGX™ FF Set

  • Cold Block Material : Anodized Aluminum;
  • Heat Sink Material : Anodized Aluminum;
  • Copperhead Hot Block materials : steel tube; copper body; nickel plating.
  • Max operating temperature : 450°C
  • LGX™ FF Set net weight : 55.5 g g
  • Package measurements : 80x103x73 mm
  • Package weight : 96 g