Phaetus x PrimaCreator MK10 Tungsten Carbide Nozzle with PTFE tube 0,4 mm – 1 pcs

689 kr

Manufacturer: PrimaCreator

Utsolgt

  Send meg epost når varen er på lager!
  Du vil få en epost når varen er tilgjengelig!

cancel?
Produktnummer: 8541 Kategori:

Beskrivelse

The premium nozzles from Phaetus/PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. This line of Nozzles is for ones who only wants the best! The Tungsten Carbide Nozzle is a true “All filaments, One Nozzle” From conventional printing with PLA to PEEK, all the way to Carbon Fiber reinforced materials, Tungsten Carbide Nozzle can easily handle it.

Super Wear-Resistance

Using the world’s leading ultra-high hardness tungsten carbide (hardness > 2700Hv (up to 2900Hv)), super wear resistance ensures long-term printing without wearness of nozzle hole and tip flat.

High Temperature Performance

Composed of tungsten carbide and copper alloy with super hardness and excellent conductivity, maximum printing temperature can be 550℃.

Low Pushing Force

Tungsten Carbide Nozzle with high purity more than 99.98% and high thermal performance keeps an even temperature of nozzle tip during printing, thus guaranteeing a stable extrusion.

Faster Extrusion Speed

Due to the high thermal performance of the nozzle in general, the printing speed can be pushed even further without sacrificing the quality. Unique passageway in the nozzle improves the flow rate at the inner hole faster.

Low Friction Thanks To Nano Coating

The whole nozzle is applied with WS2 nano-coating after adding a hard and smooth nickel plating layer. Surface friction coefficient is as low as 0.03 which makes the nozzle with clean printing, without plastic sticking to it.

Tilleggsinformasjon

Vekt 0.02 kg
Dimensjoner 5 × 5 × 0.5 cm

Tech Info

Brand PrimaCreator
Type MK10
Material Tungsten carbide
Diameter 0,40 mm
Packaging 1
Fits for Wanhao Duplicator 4S
Wanhao Duplicator 6 Plus
Wanhao Duplicator D9 Mark 2/400
Wanhao Duplicator D9 Mark 2/500
Wanhao Duplicator D9 Mark I/300
Wanhao Duplicator i3 Plus
Wanhao GR2
Flashforge Creator Pro 2 – IDEX Dual Extruder
Qidi tech
Qidi xmax
Monoprice Maker Select
Cocoon Create

Fjernlager (info)

Takk for at du viser intresse for vårt produkt.

Hvis produktet ikke er på lokalt lager i Tønsberg, så er det sannsyneligvis på lager hos vår leverandør.

Ved bestillinger over 1200kr, blir ordre sendt direkte fra vår leverandør. Dette gir en leveringstid på ca. 2-3 dager hjem til deg som kunde.

Det meste sendes da med UPS (toll og mva er inkludert i prisen)Lurer du på hvor raskt du kan ha varen? Ta kontakt med vår chat.

Omtaler

Det er ingen omtaler ennå.

Bare innloggede kunder som har kjøpt dette produktet kan legge igjen en omtale.